Huvitz Excelon XD - Hole Position Reference and Adjustment

56 Excelon XD/XQ Operator’s Manual
5.3.5 Delete Hole
Select hole to delete and then press the delete button( ).
5.3.6 Hole Position Reference (Horizontal)
Center (The distance between the hole and the center of the
frame, Temporal : – value, Nasal : + value)
Box (The distance between the hole and the box edge of the
frame)
Frame ( The distance between the hole and the frame)
• Horizontal Reference
!
NOTE
Nasal
Temporal
Frame Frame Center
Box
Box
Frame