Huvitz Excelon XD - Layout and Edging Default Settings

Excelon XD/XQ Operator’s Manual 85
• Realtime Edging Window (expr)
Realtime Edging Window – Show edging progress window when edging
started.
Progress Bar Only – Show only edging steps
• Disable processed job editing
Processed job cannot be modified.
• Show Blocking Offset
Shows manual blocker guide line on the frame area (Boxing center.only)
• Digital PTN Apply Method
Select FPD/Bridge Size recalculation method when frame shape changed
by Digital Pattern
• Turn Off Job Merge Warning
Turn off the duplication of the job warning message
6.1.2 Layout Default
• Default Side
Select default lens side.
• Layout mode
Select default lens type (Normal lens, bifocal lens, bifocal(blend) lens)
• Blocking Mode
Select default blocking mode (Boxing Center, Optical Center)
• OH type
Select default OH type (Delta Y, Box Height, Mix Height)
• Default Value (PD, Delta Y, Bridge Size)
Input default values
• Bifocal Offset
Input default blocking offset of the bifocal lens.
• Bifocal Lens Size
Input default size of near vision area.
• R/L Sync