0.10
PINCH POINT
Machine parts may move without warning, either because the machine is
operating automatically, or because another person initiates the motion. Keep
hands clear of all labeled pinch points, whenever the machine is running.
Machine vises can exert great force and cause severe injury. Keep hands
clear of vises and workpiece when vises are opened or closed. Be aware
that vise closing or opening may result in potentially dangerous workpiece
movement. Be aware also that the opening motion of a vise may create
potential pinch points.
MOVING PARTS CAN CRUSH AND CUT
Keep hands clear of chip auger. Lock-out power in accordance with your
company’s lock-out procedures before attempting to clear a jam in the chip
auger.
Be aware that the chip auger may start unexpectedly, either because the
machine is operating automatically, or because another person initiates the
motion.
If the chip auger is stalled because of a jam, it may start without warning when
the jam is cleared, unless the machine power is locked out.
LOCATION AND PART NUMBERS OF SAFETY HAZARD LABELS ON
H10SV
Warning
Pinch Point
Item No 392801
Danger
Moving bandsaw blade will cut
Item No 391937
To Next Page
Loading...
