PARTS LIST
9-2 HySpeed HT2000 Instruction Manual
24
Introduction
The format to list and call out Hypertherm parts is as follows:
Part
Item Number Description Designator Qty.
129118 Chopper SA, 15KW, HT2000 CH1 1
1 001232 Bracket, HT2000 Chopper Module 2
35 041118 PC BD Assy Snubber PCB1 1
Item: Refers to item call out on same or opposing page.
Number (Ex. 1) refers to numbered call out on same or opposing page.
Part
Number: Refers to Hypertherm part numbers.
Bold part numbers (Ex. 029320) signify parent or subassemblies that contain
additional items.
Normal-style part numbers (Ex. 001232) signify items that may or may not be under a
parent or subassembly.
Description: Describes the item.
Bold descriptions not indented (Ex. Chopper SA, 15KW, HT2000) signify parent assemblies
that contain additional items.
Normal-style part numbers that are indented (Ex. Bracket, HT2000 Chopper Module) signify
items under parent or subassembly. In this example, parent is Chopper SA, 15KW, HT2000.
Bold descriptions that are indented (Ex. PC BD Assy Snubber) represent subassemblies
that are under a parent assembly.
Designator: Represents a cross reference to wiring diagrams or pneumatic diagrams.
(Ex. CH1 refers to chopper assembly CH1 shown in wiring diagrams)
Note: When referencing components to the wiring diagrams in Section 10, designations
may appear to be repeated. Ex: C1 appears on sheet 2 of 13 in the wiring diagrams
in two separate locations. Sections of the power supply on that page are outlined
with a dotted box and a label. Within different sections, the same designation may
appear. Be certain to check the dotted box label when looking for or cross-
referencing HT2000 parts.
Qty.: Refers to the number of items in the parent or subassembly.
System Parts Diagram
On the following page is a system parts diagram with reference numbers to system components, cabling, and
hosing. To locate a part, find the system component reference number in the diagram, and find the same
reference number in the parts list. Components with many parts (such as the HT2000 power supply) are
additionally broken down to major components and subassemblies.