INSTALLATION
4-2 HySpeed HT2000 Instruction Manual
19
Claims
Claims for Damage During Shipment
If your unit was damaged during shipment, you must file a claim with the carrier. Hypertherm will furnish you
with a copy of the bill of lading upon request. If you need additional assistance, call our Customer Service
department at 1-800-643-0030 or Field Service at 1-800-643-9878.
Claims for Defective or Missing Merchandise
All units shipped from Hypertherm undergo rigorous quality control inspections for defects. If any of the
merchandise is defective or missing, call your distributor. He will be able to help you. If you need additional
assistance, call our Customer Service department at 1-800-643-0030 or Field Service at 1-800-643-9878.
Upon Receipt
The system is shipped mounted on skid(s) and protected by heavy carton covers. Before unpacking, inspect
the cartons for evidence of damage during shipment. If there is evidence of damage, refer to Claims for
Damage During Shipment for details.
1. Remove the units and items from the shipping cartons.
2. Verify that the components of the system, optional units, cables and hoses, and items listed below are
included.
Alert your distributor or Hypertherm if any of the items are damaged or missing. All communications
regarding this equipment must include the model number and serial number (located on the back of the
power supply). Refer to Claims for Defective or Missing Merchandise for details.
System Components
• Power Supply
• Remote High Frequency (RHF) Console
• Gas Console
• Motor Valve Console
• Cables
• Cooling hoses
• Valve/Torch Cable/Hose SA (to Motor Valve Console)
• Shielded torch lead set (to RHF Console)
• Machine torch
• Consumable spare parts kit
Optional Units
• Remote Voltage/Current (V/C) Control
Digital Remote
or
Programmable Remote
• Argon-Hydrogen Manifold
• Initial Height Sensing (IHS)
• Water Muffler
• Timer/Counter
To Next Page
Loading...
Need help?
General
