Changed Page Description
IM246 Rev 8 to 9 8/21/98
0.01 Uprevved because of ECNs 9763, 9758, 9803
8.25 New graphic of coolant flow
8.26
Updated graphic of coolant tank
9/18
New graphic of rear wall outside
9.19
New part numbers for solenoid valve assembly, water pump assembly
10.01
Added coolant flow diagram to wiring diagrams TOC
10.19
Added coolant flow diagram to wiring diagrams
Changed Page Description
IM246 Rev 6 to 7 5/4/98
0.01 Uprevved because of new 100A electrode and change to cut charts
6.13 Changed index to call out 120547 electrode
6.17
Changed electrode part number to 120547
6.18
Changed electrode part number to 120547; changed flow %
9.49
Updated consumable parts kit contents
Changed Page Description
IM246 Rev 7 to 8 7/24/98
0.01 Uprevved because of ECNs 9523, 9483, grounding appendix, serial # jump to 2000-005000
0.05 Added System Grounding to TOC
0.06
Added System Grounding to TOC
0.07
Bumped page
0.08
Added System Grounding to TOC
3.04
Referenced new grounding appendix
4.03
Referenced new grounding appendix
4.04
Referenced new grounding appendix
7.06
Added more verbiage on H35 cutting
7.07
Bumped page
7.08
Added more verbiage on H35 cutting
8.09
New power distribution PCB graphic, added fuse
8.22
Added error code for phase loss
9.05
New microprocessor board #, new firmware #
9.12
Referenced dwg of chopper with phase loss board
9.13
New graphic of chopper with phase loss board, new phase loss board #
9.51
New microprocessor board #, new firmware #
10.01
Uprevved wiring diagrams to RT
g.01
New system grounding appendix
g.02
New system grounding appendix
g.03
New system grounding appendix
g.04
New system grounding appendix
g.05
New system grounding appendix
i.04
Added phase loss to index
i.05
Added g1-g4 to grounding requirements in index
To Next Page
Loading...
Need help?
General
