Hypertherm Powermax 85 Operator's Manual

MAINTENANCE AND REPAIR
powermax 65/85 Operator Manual 5-7
Fault
code
Description Power
LED
Fault
LED
Fault
icon
Solutions
0-30 Torch consumables stuck
This indicates either a
“torch stuck open” or
a “torch stuck closed”
situation.
On On • If the consumables
became loose or were
removed while the power
supply is ON, turn OFF the
power supply, correct the
problem and then turn ON
the power supply to clear
this fault.
• If the consumables appear
to be installed correctly,
the torch may be damaged.
Contact your Hypertherm
distributor or authorized
repair facility.
0-40 Over/under temperature On On • Leave the power supply on
to allow the fan to cool the
power supply.
• If the internal temperature
of the power supply
approaches -22°F
(-30°C), movethe power
supply to a warmer
location.

Hypertherm Powermax 85 Specifications

General

Brand	Hypertherm
Model	Powermax 85
Category	Welding System
Language	English