Hypertherm Powermax 85 Operator's Manual

PARTS
6-14 powermax 65/85 Operator Manual
Accessory parts
Part number Description
024548 Leather torch sheathing, 25 ft (7.5 m)
127102 Basic plasma (circles and lines) cutting guide
027668 Deluxe plasma (circles and lines) cutting guide
127301 Powermax65/85 dust cover
128647 Kit: Eliminizer air filter
228570 Kit: Eliminizer air filter with cover
228624 Kit: Eliminizer filter cover
223125 Kit: 65 A Work lead with hand clamp, 25 ft (7.5 m)
223126 Kit: 65 A Work lead with hand clamp, 50 ft (15.2 m)
223127 Kit: 65 A Work lead with hand clamp, 75 ft (22.9 m)
223194 Kit: 65 A Work lead with C-style clamp, 25 ft (7.5 m)
223195 Kit: 65 A Work lead with C-style clamp, 50 ft (15.2 m)
223196 Kit: 65 A Work lead with C-style clamp, 75 ft (22.9 m)
223197 Kit: 65 A Work lead with magnet clamp, 25 ft (7.5 m)
223198 Kit: 65 A Work lead with magnet clamp, 50 ft (15.2 m)
223199 Kit: 65 A Work lead with magnet clamp, 75 ft (22.9 m)
223200 Kit: 65 A Work lead with ring terminal, 25 ft (7.5 m)
223201 Kit: 65 A Work lead with ring terminal, 50 ft (15.2 m)
223202 Kit: 65 A Work lead with ring terminal, 75 ft (22.9 m)
223035 Kit: 85 A Work lead with hand clamp, 25 ft (7.5 m)
223034 Kit:85 A Work lead with hand clamp, 50 ft (15.2 m)
223033 Kit: 85 A Work lead with hand clamp, 75 ft (22.9 m)
223203 Kit: 85 A Work lead with C-style clamp, 25 ft (7.5 m)
223204 Kit: 85 A Work lead with C-style clamp, 50 ft (15.2 m)
223205 Kit: 85 A Work lead with C-style clamp, 75 ft (22.9 m)

Hypertherm Powermax 85 Specifications

General

Gas Supply	Clean, dry, oil-free air or nitrogen
Cooling Method	Fan-cooled
Input Voltage	200-600V, 3-phase
Current Output	25-85 A
Duty Cycle	60% @ 85 A
Recommended Gas Inlet Flow Rate/Pressure	6.7 scfm @ 85 psi
Cutting Capacity (Recommended)	1" (25 mm)
Gas Type	Air/Nitrogen