Hypertherm Powermax 85 Operator's Manual

SPECIFICATIONS
powermax 65/85 Operator Manual 1-5
Component weights
65 A CSA 65 A CE 85 A CSA 85 A CE
lbs (kg) lbs (kg) lbs (kg) lbs (kg)
Power supply 54.1 (24.5) 47.0 (21.3) 59.9 (27.2) 50.4 (22.8)
65/85 A
lbs (kg)
Hand torch 25 ft (7.6 m) 6.8 (3.1)
Hand torch 50 ft (15 m) 12.2 (5.5)
Hand torch 75 ft (23 m) 17.6 (8.0)
Machine torch 25 ft (7.6 m) 7.6 (3.4)
Machine torch 50 ft (15 m) 13.2 (6.0)
Machine torch 75 ft (23 m) 18.8 (8.5)
65 A 85 A
lbs (kg) lbs (kg)
Work lead 25 ft (7.6 m) 2.8 (1.3) 6.8 (3.1)
Work lead 50 ft (15 m) 5.0 (2.3) 7.5 (3.4)
Work lead 75 ft (23 m) 6.9 (3.1) 10.6 (4.8)

Hypertherm Powermax 85 Specifications

General

Gas Supply	Clean, dry, oil-free air or nitrogen
Cooling Method	Fan-cooled
Input Voltage	200-600V, 3-phase
Current Output	25-85 A
Duty Cycle	60% @ 85 A
Recommended Gas Inlet Flow Rate/Pressure	6.7 scfm @ 85 psi
Cutting Capacity (Recommended)	1" (25 mm)
Gas Type	Air/Nitrogen