Hypertherm Powermax 85 Operator's Manual

POWER SUPPLY SETUP
powermax 65/85 Operator Manual 2-3
Operator Manual
Safety Manual
Quick Setup Card
Registration Card
Contents
Verify the items in the box against the illustration.
Box with extra
consumables
(located next
to air filter)
Setup DVD
Or
Remote-start pendant (optional)

Hypertherm Powermax 85 Specifications

General

Gas Supply	Clean, dry, oil-free air or nitrogen
Cooling Method	Fan-cooled
Input Voltage	200-600V, 3-phase
Current Output	25-85 A
Duty Cycle	60% @ 85 A
Recommended Gas Inlet Flow Rate/Pressure	6.7 scfm @ 85 psi
Cutting Capacity (Recommended)	1" (25 mm)
Gas Type	Air/Nitrogen