Hypertherm Powermax 85 - Section 3; Torch Setup

powermax 65/85 Operator Manual 3-1
Section 3
TORCH SETUP
In this section:
Introduction ......................................................................................................................................................... 3-3
Consumable life .................................................................................................................................................. 3-3
Hand torch setup ............................................................................................................................................... 3-4
Choose the hand torch consumables ................................................................................................ 3-5
Hand torch consumables ...................................................................................................................... 3-6
Install the hand torch consumables ..................................................................................................... 3-7
Machine torch setup.......................................................................................................................................... 3-8
Converting an M65/M85 torch to an M65m/M85m torch ............................................................ 3-9
Mount the torch ......................................................................................................................................3-11
Choose the machine torch consumables ........................................................................................3-14
Machine torch consumables ...............................................................................................................3-14
Install the machine torch consumables ............................................................................................3-17
Aligning the torch ..................................................................................................................................3-17
Connecting an optional remote-start pendant ...............................................................................3-18
Connecting an optional machine interface cable ...........................................................................3-19
Connecting the torch lead .............................................................................................................................3-24