Hypertherm Powermax 85 Operator's Manual

POWER SUPPLY SETUP
2-2 powermax 65/85 Operator Manual
Unpack the Powermax65 or Powermax85 system
1. Verify that all items on your order have been received in good condition. Contact your
distributor if any parts are damaged or missing.
2. Inspect the power supply for damage that may have occurred during shipping. If there is
evidence of damage, refer to “Claims” below. All communications regarding this equipment
must include the model number and the serial number located on the back of the power
supply.
3. Before you set up and operate this Hypertherm system, read the separate Safety and
Compliance Manual included with your system for important safety information.
Claims
• Claims for damage during shipment – If your unit was damaged during shipment,
youmust file a claim with the carrier. Hypertherm will furnish you with a copy of the bill
oflading upon request. If you need additional assistance, call the nearest Hypertherm
office listed in the front of this manual.
• Claims for defective or missing merchandise – If any component is missing or
defective, contact your Hypertherm distributor. If you need additional assistance, call
thenearest Hypertherm office listed in the front of this manual.

Hypertherm Powermax 85 Specifications

General

Brand	Hypertherm
Model	Powermax 85
Category	Welding System
Language	English