Part number 10187723 Part number 10138922
J-.25 DSP-.25 J-5 DSP-5
J-.5 DSP-.5 J-8 DSP-8
J-1 DSP-1
J-2 DSP-2
J-3 DSP-3
3.5.3 Silencer system
Caution:
• Do not modify the silencer system in any way.
• Only use a single silencer system hose with a maximum length of 4 m (13
ft.).
The silencer system reduces the sound emission to approximately 75 dB. The silencer
system has two parts:
• the exhaust silencer (A)
• the silencer system hose (B)
Procedure
1. Connect the silencer system hose
(B) to the FRL and the tool.
3.5.4 BoltSafe load tester
The BoltSafe load tester has a reading system and one or more sensors. The BoltSafe
load tester helps to find the correct tool setting for the used bolt. The sensors are shaped
and used as a regular washer. Different BoltSafe read-out systems are available for
continuous and periodic measurement.
Description
16 47 - 001 -
To Next Page
Loading...
