Hytorc jGun Series - Reaction strip (recessed bolt heads); HYTORC Washer double-drive socket

5.12 Reaction strip (recessed bolt heads)
Procedure
1. Place the drive into the nut as far as
possible.
2. Place the reaction arm as shown.
3. Place the tool as shown.
5.13 HYTORC Washer
™
double-drive socket
Procedure
1. Place the HYTORC Washer
™
under the regular nut.
2. Place the double-drive socket with
the tool over the nut and reaction
washer completely.
5.14 HYTORC LoadDISC
™
double-drive socket
The HYTORC LoadDISC
™
double-drive socket allows for inverted hands-free operation.
+\GUDXOLF (OHFWULF 3QHXPDWLF
+\GUDXOLF (OHFWULF 3QHXPDWLF
Reaction arms
28 47 - 001 -