Changed information
This section lists the updates that were made in this document.
v There is a new SAN Volume Controller model, the SAN Volume Controller
2145-8G4. This publication continues to document the SAN Volume Controller
by model number.
Note: If text is referring to the SAN Volume Controller, it is referring to a
generic SAN Volume Controller and can be referring to all SAN Volume
Controller models. When the SAN Volume Controller is referred to as the
SAN Volume Controller 2145-4F2, the SAN Volume Controller 2145-8F2,
the SAN Volume Controller 2145-8F4, or the SAN Volume Controller
2145-8G4, the specific SAN Volume Controller is designated.
v The IBM System Storage SAN Volume Controller Installation Guide is now titled
IBM System Storage SAN Volume Controller: Hardware Installation Guide.
v The IBM System Storage SAN Volume Controller Configuration Guide is now titled
IBM System Storage SAN Volume Controller: Software Installation and Configuration
Guide.
v The IBM System Storage Master Console for SAN Volume Controller: Installation and
User’s Guide and the IBM System Storage Master Console for SAN Volume
Controller Information Center are no longer updated and distributed. Instead, all
pertinent information from those information units have been incorporated into
other SAN Volume Controller publications.
v The procedure for checking the grounding of a SAN Volume Controller node.
v The description of the shutdown operation of the 2145 UPS-1U and the 2145
UPS
v “Using the front panel of the SAN Volume Controller” topics have moved to an
appendix.
Emphasis
Different typefaces are used in this guide to show emphasis.
The following typefaces are used to show emphasis:
Boldface Text in boldface represents menu items and
command names.
Italics Text in italics is used to emphasize a word.
In command syntax, it is used for variables
for which you supply actual values, such as
a default directory or the name of a cluster.
Monospace Text in monospace identifies the data or
commands that you type, samples of
command output, examples of program code
or messages from the system, or names of
command flags, parameters, arguments, and
name-value pairs.
About this guide xi
To Next Page
Loading...
Need help?
General
