IBM 2145UPS-1U - Figures

Figures
1. Example of a SAN Volume Controller cluster in
a fabric . . . . . . . . . . . . . .4
2. SAN Volume Controller 2145-8G4 operator
information panel . . . . . . . . . . .8
3. SAN Volume Controller 2145-8G4 fibre-channel
LEDs . . . . . . . . . . . . . . .11
4. SAN Volume Controller 2145-8G4 ac and dc
LEDs . . . . . . . . . . . . . . .12
5. Service ports of the SAN Volume Controller
2145-8G4 . . . . . . . . . . . . .14
6. The physical port numbers for the SAN
Volume Controller 2145-8G4 . . . . . . .17
7. A four-node SAN Volume Controller cluster
with the redundant ac power switch feature .21
8. The 2145 UPS-1U front panel assembly 24
9. Ports not used by the 2145 UPS-1U . . . .27
10. Parts provided for SAN Volume Controller
hardware installation in a rack . . . . . .36
11. Attaching the mounting plates . . . . . .38
12. Power cable clips . . . . . . . . . .39
13. Positioning the clips . . . . . . . . . .39
14. Positioned in rack . . . . . . . . . .40
15. Installing the support rails for a 2145 UPS-1U
into the rack . . . . . . . . . . . .42
16. Adjusting the rail depth on the 2145 UPS-1U 42
17. Securing the rear rail on the 2145 UPS-1U 43
18. Securing the front rail on the 2145 UPS-1U 43
19. Removing the 2145 UPS-1U front panel 45
20. The 2145 UPS-1U internal battery connector
with protective tape . . . . . . . . . .45
21. The 2145 UPS-1U internal battery connector 46
22. 2145 UPS-1U (rear view) . . . . . . . .46
23. The 2145 UPS-1U front panel assembly 47
24. 2145 UPS-1U power cable retention bracket
hardware . . . . . . . . . . . . .48
25. 2145 UPS-1U power cable retention bracket 48
26. SAN Volume Controller 2145-8G4 support rails
installation kit . . . . . . . . . . . .50
27. Inserting the right slide rail into the rear rack
mounting flange . . . . . . . . . . .50
28. Extending the right slide rail . . . . . . .51
29. Attaching the latch strike to the front of the
rail . . . . . . . . . . . . . . .51
30. Attaching the slide rail to the rear mounting
flange . . . . . . . . . . . . . .52
31. Connecting the SAN Volume Controller
2145-8G4 power cable to the 2145 UPS-1U . .54
32. The SAN Volume Controller 2145-8G4 before
you attach the cable retention bracket . . . .57
33. The SAN Volume Controller 2145-8G4 with
cable retention bracket option A attached . .57
34. The SAN Volume Controller 2145-8G4 with
cable retention bracket option B attached . . .58
35. Connectors at the back of the SAN Volume
Controller 2145-8G4 . . . . . . . . . .59
36. Front panel display when push buttons are
pressed . . . . . . . . . . . . . .60
37. Node number . . . . . . . . . . . .60
38. Ethernet mode . . . . . . . . . . .61
39. SAN Volume Controller 2145-8F4 and SAN
Volume Controller 2145-8F2 operator
information panel . . . . . . . . . .69
40. SAN Volume Controller 2145-8F4 rear panel 72
41. SAN Volume Controller 2145-8F2 rear panel 72
42. SAN Volume Controller 2145-8F4 fibre-channel
LEDs . . . . . . . . . . . . . . .73
43. SAN Volume Controller 2145-8F4 and SAN
Volume Controller 2145-8F2 ac and dc LEDs .75
44. Service ports of the SAN Volume Controller
2145-8F4 . . . . . . . . . . . . .76
45. Ports not used by the SAN Volume Controller
2145-8F4 . . . . . . . . . . . . .77
46. Ports not used on the front panel of the SAN
Volume Controller 2145-8F4 . . . . . . .77
47. The physical port numbers for the SAN
Volume Controller 2145-8F4 . . . . . . .79
48. The physical port numbers for the SAN
Volume Controller 2145-8F2 . . . . . . .79
49. Installing the support rails for a 2145 UPS-1U
into the rack . . . . . . . . . . . .80
50. Adjusting the rail depth on the 2145 UPS-1U 81
51. Securing the rear rail on the 2145 UPS-1U 81
52. Securing the front rail on the 2145 UPS-1U 82
53. Removing the 2145 UPS-1U front panel 83
54. The 2145 UPS-1U internal battery connector
with protective tape . . . . . . . . . .84
55. The 2145 UPS-1U internal battery connector 84
56. 2145 UPS-1U (rear view) . . . . . . . .85
57. The 2145 UPS-1U front panel assembly 85
58. 2145 UPS-1U power cable retention bracket
hardware . . . . . . . . . . . . .86
59. 2145 UPS-1U power cable retention bracket 87
60. Retracting the latch lock carrier . . . . . .88
61. Opening the front latch-lock carrier assembly 88
62. Opening the back latch-lock carrier assembly 89
63. Installing the front end of the rail . . . . .90
64. Closing the latch-lock carrier assembly . . .91
65. Connecting the SAN Volume Controller
2145-8F2 power cable to the 2145 UPS-1U . .93
66. Attaching the cable retention bracket to the
SAN Volume Controller 2145-8F4 power cable .94
67. The SAN Volume Controller 2145-8F4 with
cable retention bracket attached . . . . . .94
68. Connectors at the back of the SAN Volume
Controller 2145-8F4 . . . . . . . . . .95
69. Connectors at the back of the SAN Volume
Controller 2145-8F2 . . . . . . . . . .95
70. Front panel display when push buttons are
pressed . . . . . . . . . . . . . .96
71. Node number . . . . . . . . . . . .97
72. Ethernet mode . . . . . . . . . . .97
© Copyright IBM Corp. 2003, 2007 vii
|
||
|
||
|
||