Table 94: Port/Node Names menu (CE Offline Mode)
Function Next menu
Port Names/WWID
0=5005076302400143
1=5005076302800143
“Fibre Options menu (CE Offline Mode)” on page 129
Node Names/WWID
0=5005076302000143
1=5005076302C00143
“Fibre Options menu (CE Offline Mode)” on page 129
Cancel
Causes the “Fibre Options menu (Services menu)” on page 100 to display.
Port 0 / Port 1 Name
Both Fibre port 0 and Fibre port 1 names are displayed.
Node 0 / Node 1 Name
Both Fibre node 0 and Fibre node 1 names are displayed.
Set Root Name menu
Table 95 on page 130
shows the Set Root Name menu items. This menu allows the drive Root name to be
set.
Table 95:
Set Root Name menu (CE Offline Mode)
Function Next menu
Cancel “Fibre Options menu (Services menu)” on page 100
5 -
0 -
0 -
5 -
… -
Save and Continue “CE Save Data menu (Root, Port, and Node names)” on page 132
Note:
1. Supplemental Message Line 1: Port0 ID=aa bb cd
2. Supplemental Message Line 2: Port1 ID=aa bb cd
Note: If you alter any name, you must save or alter all the names. For example, if you alter the Node
Name only, at minimum, you must save Port 0 and Port 1.
Cancel
Causes the “Fibre Options menu (Services menu)” on page 100 to display.
0123456789ABCDEF
Selecting this option increments the hexadecimal character. The number wraps from ‘F’ to ‘0’.
Save and Continue
Causes “CE Save Data menu (Root, Port, and Node names)” on page 132 menu to display to allow or
disallow saving data in DRAM.
130
IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information
To Next Page
Loading...
Need help?
General