c) Release the front retention bracket. See c in the following gure.
Figure 26. Mounting the front left rail to the rack posts
4. Release the front retention bracket.
a) Retract and hold the rear retention bracket. See a in the following gure.
b) Insert the pegs on the mounting flange into the rack holes. See b in the following gure.
Figure 27. Releasing the retention bracket of the rear right rail
5. Fix the system in the rack.
a) Release the rear retention bracket. See a in the following gure.
b) Fix the rails on the rack post by using 2x M5 screws. See b in the following gure.
Chapter 4. Installing
45
To Next Page
Loading...
