6 Are you using a personal computer, IBM ThinkPad, or a similar device with display emulation
program (5250 or
31
xx) as the system console?
Note: This step does not support a personal computer that has Client Access/400 active.
No
Yes
i Power on the personal computer and perform
an
IPL
on
the personal computer.
Go to step 8 of this procedure.
7 Are you using a programmable workstation local attachment for Macintosh as the system console?
No
Yes
Power
on
the Macintosh workstation and perform the following:
a. Double-click
on
the icon for the hard drive
on
which the SNA•ps folder
is
installed.
b.
Double-click
on
the SNA•ps folder.
c.
Double-click
on
the 5250 Access/AT Documents folder.
d. Double-click
on
the Console document.
Continue to the next step of this procedure.
8 Press the power pushbutton
on
the
9401
System Unit
to
perform
an
IPL. The IPL takes approxi-
mately 20 minutes to complete.
9
Is
the system console a twinaxial or ASCII attached personal computer, IBM ThinkPad, or similar
device that needs the Client Access/400 support program installed?
Yes
No
Go to step
11
of this procedure.
1 0 You can install the personal computer support functions (on twinaxial or ASCII attachments) while
the system is performing
an
IPL. Go to "Installi
ng
Client Access/400 and Emulation Support"
on
page 6-5. After you have completed installing the personal computer support functions, return here
and continue to the next step of this procedure.
Note: If you have local area network communications, use the communications information to '
install the support functions.
~
11
Does the Sign On display appear
on
the system console?
Yes
No
Go to the "Handling and Reporting System Problems" section in the System Startup
a
nd
Problem Handling book.
6·2 AS/400
94
01 Installation - Models P03 and 1 OS V3R1
To Next Page
Loading...
