L
Chapter
2.
Prepare to Install the
9401
System Unit
This chapter contains instructions
on
how to prepare your system for installation.
1 Unpack the
9401
System Unit.
2 Extend the
9401
System Unit stabilizer feet.
a.
Place the
9401
System Unit
in
a vertical position
on
a flat surface.
Do
not place the unit
on
the
floor.
b.
With one hand, grip the top of the unit and carefully tilt
it
to
one side.
c.
With your other hand, grip the foot
in
the center.
d.
Pull the foot away from the unit.
e.
Pull
the foot up
to
lock
in
place.
f.
Tilt the unit
to
the other side and repeat this procedure for the other foot.
Note: The
9401
unit cannot
be
placed
in
the (optional) carrying case with the stabilizer feet
extended.
3 Place the
9401
System Unit where
you
plan
to
install
it.
© Copyright
IBM
Corp. 1995
2-1
To Next Page
Loading...
