4 Remove the back cover of the system unit (if it is installed).
0
RV3D262·1
a.
Grip the upper corners of the cover and pull away from the unit.
b.
When the top clips release, lower the cover until the bottom clips clear the slots of the system
unit.
c.
Set the cover out of the way.
Note:
The
9401
unit cannot
be
placed in the (optional) carrying case with the back cover installed.
2-2 AS/400 9
401
In
stall
at
ion - Models P03 and 10S V3R1
To Next Page
Loading...
