IBM AS/400 9401 P03 - Page 17

5 Identify the cable connectors.
lllil __ __ __ .---2 -3 -,
c
II
1
RV30263-1
Figure 2-1. Card Locations and Connectors
The following connectors are located on the back of the 9401 System Unit.
El Small computer system interface (SCSI) connector
Note: A SCSI terminator may be attached to the SCSI connector.
IJ Manufacturing interface connector
II Uninterruptible power supply connector
l!J Workstation attachment connector
Note: Use this information to identify the system type - twinaxial, ASCII, or Client Access/400
Console.
Twinaxial workstation connector
2 ASCII workstation connector
3 No connector (indicates Client Access/400 Console)
DI Power cord connector
II Ad apter ca rd position
1 Token-ring card (type 9175)
2 Ethernet card (type 9174)
3 Workstation adapter card (type 6054)
Ch apter 2. Prepare to In sta ll the 94 01 System Unit 2-3