IBM AS/400 9401 P03 - Page 48

Field
For All Workstations
Drive to contain Client Access directory
Drive your personal computer starts from
Accept default configuration
Accept default configuration
Start Client Access automatically
Reduce messages displayed when starting Client
Access
Client Access functions to be started automatically
Options to use with workstation function
Initial Client Access menu
PC location name
Name of system to connect to
For Twlnaxlal Workstations Only
Connection information
Workstation address
For ASCII Workstations Only
Connection information
Additional connection information
Connect timer
Port number
Line speed
Line type
Number of data bytes
Specify a modem initializing string
Notes:
Action
c
c
No
No
Yes
Yes
Choose any, all, or none of the functions (see note 3) .
Select one, both, or none of the functions - Session
Manager or Organizer (see note 3).
No menu (command prompt)
xxxxxxxx (see note 1 )
Syyyyyyy (see note 2)
Twinaxial
0
Asynchronous communications
Press F9
255
Select the available serial port
Select the correct line speed for the serial port
Non-switched point-to-point
8
No
xxxxxxxx is any eight alphabetic characters (up to eight) that you choose (for example, THINKPAD).
2 yyyyyyy is the 9401 serial number found on the front of the machine (example 10-00001 , enter
S1000001 ).
3 The Workstation Function and Session Manager functions cannot be used wi th Microsoft Windows.
After all actions are selected, press the Enter key.
6 Throughout the installation, the displays prompt you to press the Enter key or insert the Client
Access/400 diskette.
If a prompt appears that asks about the system unit, enter a No response. You cannot communi-
cate with the AS/400 at this time.
When the completion display appears, press the Enter key and type 1 to exit the installation
program.
7 Is Microsoft Windows active?
No Yes
~ To exit the Microsoft Windows program, press and hold the Alt key, then press the F4
key. At the Exit Windows box, press the Enter key.
Continue to the next step of this procedure.
6-6 AS/400 94 01 In sta ll ation - Models P03 and 10S V 3A 1