Function/Data
02
B
NI
"it
~ Enter
~~o
- -
- -
-
-
-
-
RV3D277-0
2 Press Enter
on
the control panel. The last IPL type and mode that was selected is shown
in
the
Function/Data display.
3 Press either the Up (
t)
or Down
O)
pushbutton until the combination of IPL type and mode you
want to select is displayed.
4 Press Enter
on
the control panel to select.
Note: To verify the IPL type and mode selection see "Function
01
- Display Selected IPL Type
and
Mode"
on
page
B-1
.
This ends the procedure.
B-2 AS/400 9401 Installation - Models P03 and 1
OS
V3R1
To Next Page
Loading...
