IBM BladeCenter HX5

280 IBM eX5 Implementation Guide
Figure 6-61 Loading VMware Hypervisor panel
Figure 6-62 ESXi 4.1 Installable NUMA error
12.Enter the following command at the prompt after you have pressed Shift+O:
esxcfg-advcfg -k TRUE allowInterleavedNUMAnodes
Your output looks like Figure 6-63 on page 281.
IMPORTANT: If you do not press Shift+O during the Loading VMware Hypervisor
panel, you will receive the error that is shown in Figure 6-62:
“The system has found a problem on your machine and cannot continue.
Interleaved NUMA nodes are not supported.”