156 IBM Midrange System Storage Hardware Guide
5. The next installation window asks you whether you want to automatically start the Storage
Manager Event Monitor, as shown in Figure 4-20. This depends on your particular
management setup. In case there are several management machines, the Event Monitor
should only run on one. If you want to use the Event Monitor with SNMP, you have to install
the Microsoft SNMP service first, because the Event Monitor uses its functionality.
Figure 4-20 InstallAnywhere: Automatically Start Monitor
Note: The Event Monitor needs to be enabled for both the automatic ESM
synchronization, as well as the automatic support bundle collection on critical events.
To Next Page
Loading...
Need help?
General