Chapter 4. IBM System Storage DS planning and configuration 157
6. Finally, you are presented with the Pre-Installation Summary window, just to verify that you
have selected the correct installation options, as shown in Figure 4-21. Click the Install
button and the actual installation process starts.
Figure 4-21 InstallAnywhere: Pre-Installation Summary window
Verifying the SM installation
This section provides instructions about how to verify that you have installed the SMagent
correctly in Windows Server 2008.
To verify the correct installation of the SM, perform the following steps:
1. Look in your Programs folder for a new program entry called IBM DS Storage Manager 10
Client. This is the name of the program created after a successful installation. It also
generates a log file with the details of the installation process and options selected, and
places it into the installation directory. The file name is
IBM_System_Storage_DS_Storage_Manager_10_InstallLog.log. In case of problems
during the installation, have a look at the file for a possible hint about what could be wrong.
1. Select Start ï‚® Administrative Tools ï‚® Services. The Services window opens.
To Next Page
Loading...
Need help?
General