158 IBM Midrange System Storage Hardware Guide
2. Scroll through the list of services until you find IBM DS Storage Manager 10 Agent, as
shown in Figure 4-22.
Figure 4-22 Verifying the SMagent installation
3. The installation program creates both the IBM DS Storage Manager 10 Agent and the
Event Monitor services and starts both of them by default. If this service is not started,
right-click it and select Start. Make sure the Startup Type is set to Automatic.
If you are installing the host server and do not plan to use the host-agent software to
manage one or more storage systems, you can set the Startup Type to Manual.
Verifying the SMutil installation
To verify that you have installed the SMutil correctly on Windows operating systems, perform
the following steps:
1. Go to the installation_directory\Util directory. This is typically be C:\Program
Files\IBM_DS\Util.
2. Verify that the directory contains the following files:
– hot_add.exe
– SMdevices.bat
– SMrepassist.exe
Verifying the SM Failover driver (MPIO/DSM) installation
There are different types of MPIO/DSM drivers supported for Windows 2008. Follow these
steps to verify the installation:
1. Check the install directory for the SM Failover driver. The default install directory is
C:\Program Files\DSMDrivers\ds4dsm.
To Next Page
Loading...
Need help?
General