Chapter 4. IBM System Storage DS planning and configuration 177
Record the Feature Enable Identifier and continue with the next section to generate your
activation file. Later we use the same options and window to activate the purchased premium
features.
Use the Web to generate the activation file
With the Feature Enable Identifier and the registration card provided with the machine for the
purchased premium features, go to the following Web site to generate the activation file:
https://www-912.ibm.com/PremiumFeatures/
In the Web site, select Activate a Premium Feature, read the requirements, and then click
Continue. Complete the fields presented in the window shown in Figure 4-40 by entering the
feature activation code received in the card shipped with the DS5000 storage subsystem, the
feature enable identifier obtained in “Obtain the Feature Enable Identifier for your storage
subsystem” on page 176, and your specific machine type, model number, and serial number.
Figure 4-40 Premium features registration
Scroll down, complete the remaining fields by entering your e-mail address, and submit the
information by clicking Continue. The activation key file is then e-mailed to you. Save the
received file in your folder, and continue with next step.
To Next Page
Loading...
Need help?
General