1120 Local Area Network Diagnostic Tests
This procedure uses SSP procedures (for example, PROBLEM) to diagnose local area network problems.
Diagnostic tests for the local area network will attempt to locate problems in internal and external local area
network communications interfaces. There are three types
of
diagnostic tests for the local area network:
• Diagnostic tests during
IPL
• Diagnostic tests during on-line problem determination
• Diagnostic tests during concurrent maintenance
Diagnostic Tests During IPL
Diagnostic tests during
IPL
test the local area network adapter.
Diagnostic Tests During On-line Problem Determination
Diagnostic tests during on-line problem determination test the local area network hardware.
Diagnostic Tests During Concurrent Maintenance
Station test (STATEST) permits on-line testing between the system and the local area network.
1.
Run
STATEST.
a.
Key in STATEST and press the Enter
key.
b.
Follow the prompts.
5363
Cable
Adapter Card
for Local
Area Network
Customer
Access
Unit
Network
R36B135-3
Section
11.
Local Area Network Procedures 11-3
To Next Page
Loading...
Need help?
General