Appendix
B.
Safety Inspection Guide
GeHing Ready
Before performing the inspection procedures contained in this guide, ensure
that
present conditions are safe,
the machine
is
powered off, and the power cord is disconnected.
Safety Conditions
If
present conditions are
not
safe, you must determine
if
the condition
is
serious.
For
example, the following
conditions are
not
safe:
• Electrical:
In
the primary power area, a frame
that
is
not
grounded
• Mechanical: Missing covers
• Other: Leaking capacitors
or
a damaged
CRT
face
You must determine
if
the problem should be repaired before you can continue with this inspection.
Safety Education
Before performing the inspection procedures contained in this guide, you must have completed the General
Safety Training Course (latest level).
Chemicals
Do
not
use solvents, cleaners,
or
other chemicals
not
approved by IBM.
Performing the Inspection
The design and assembly
of
IBM machines includes safety items installed to protect operators and service
representatives from injury. This inspection guide identifies areas
of
the machine
that
may
not
be safe. Use
good judgment to identify other safety conditions
not
covered by this inspection guide.
Appendix B. Safety Inspection Guide B-1
To Next Page
Loading...
Need help?
General