IBM System/36 - Page 170

control storage directory, list 3-15
COPYIl 3-11
cover removal 3-2
covers, system/safety B-3
CSU, communications 9-4
customer
IPL 3-7
customer setup, communications 9-4
customize load options 3-9
customize, system 3-8
o
DC 3-11
D H 3-11
danger notices
VIII
DC base and feature voltage tolerances 4-12
DC base voltage distribution
4-11
DC feature voltage distribution 4-12
DCP 3-9
See also utilities
DCP load options 3-14
DCP supervisor options 3-15
DCP utilities 3-15
DFA 3-11
DIAGCOPY 3-11
DIAGINIT 3-11
diagnostic
IPL 3-13
diagnostic tests during concurrent maintenance
(LAN) 11-3
diagnostic tests during
IPL (LAN) 11-3
diagnostic tests during on line problem determination
(LAN) 11-3
diagnostic tests LAN 11-3
disk 1-5,8-2
exerciser 3
-1 0
disk drive 1-5, 8-2
problem determination 8-2
removals 8-5
replacements 8-5
disk drive A maximum ripple voltage table 4-13
disk drive B maximum ripple voltage table 4-14
disk drive
ERAP. 8-3
disk drive initialization 8-7
disk drive isolation 8-4
disk drive
part numbers 8-5
disk drive reload procedure 1-5
disk failures 1-5, 8-2
disk storage, alter/display 3-22
diskette
drive removal
6-3
exerciser 3-10
voltage check 6-3
diskette (SSP01) 3-9, 3-14
diskette directory, list 3-15
diskette drive maximum ripple voltage table 4-14
diskette failures 6-2
diskette
61 3-9, 3-14
X-2 5363 Maintenance Information
diskette, disk attachment overview 2-4
display
I/O controller storage 3-22
display station exerciser 3-10
display storage function 3-22
display/alter 3-22
See also alter/display function
control storage 3-22
disk storage 3-22
main storage 3-22
MSP registers 3-22
displaying storage 3-22
distribution base DC voltage 4-11
distribution feature DC voltage 4-12
drive removal, diskette 6-3
dump 3-6, 3-11
E
EC level table, list 3-15
EIA signal wraps 9-10
electrostatic discharge/description
C-1
ERAP 3-10, 3-11, 3-24
ERAP disk drive 8-3
ESD C-1
ESD handling kit C-1
exercisers (SYSTEST)
F
communications 3-10
disk 3-lO
diskette 3-10
display station 3-lO
main storage 3-lO
printer 3-lO
tape 3-10
failures
disk 1-5, 8-2
diskette
6-2
IPL 1-5,8-2
twinax 7-15
failures/main storage 1-10
fan airflow cover
cover fan airflow
3-4
fan removal 3-4
fan replacement 3-4
feature DC voltage distribution 4-12
feature DC voltage tolerances 4-12
feature
I/O bus attachment overview 2-5
feature power supply removal
removal feature power supply
4-3
FRU isolation
diskette drive
6-2
IPL 1-5, 8-2
replacing disk drives 1-5
function A (Communications Line Status) 9-6,9-7
function 1 (IPL) 3-7