340
B1
Board Removal and Replacement Procedures
To
remove the
81
board:
Note: Label all cards as to which location they were removed from. This will be
of
help to you when you
reinstall the cards.
1.
Power off the
5363
and disconnect the power cord
at
the customer power outlet and the 5363.
2.
Remove the covers ("305 Cover Removal" on page 3-2).
3.
Remove all cards plugged into the BI board.
4.
Remove power connectors P4 and P5.
5.
Remove the two screws securing the board to the logic board gate.
6.
Pull and slide the BI board
out
of
the
Al
board connectors BI-G.
3-16
5363
Maintenance Information
To Next Page
Loading...
