v Return the lift tool to the parts center after you complete the installation or removal of the DCS3700.
United States locations
In the United States, call UPS Logistics at 800–528–6070 to order the lift tool or visit the MTS/Test
Equipment Service Center Web site on the IBM intranet at http://pokgsa.ibm.com/~tstesc/public/ for
additional information.
Notes:
1. For the SSR branch and territory, the United States cannot order the lift tool through the parts order
system. UPS Logistics are used to ship and return the lift tool. Use the following part numbers when
you order: Lift tool: Part number 09P2481.
2. The MTS/Test Equipment Service Center Web site can be accessed only by IBM employees with
access to the IBM intranet.
Attention: When you order the lift tool, you will receive an 18–inch load plate.
You must provide the following information when you order the lift tool. This information is necessary to
ensure that the lift tool is delivered when you need it. Failure to provide this information might delay the
completion of the order request and the shipping request. It might also result in a time and date to return
the tool that is different from what you need.
v Phone number and customer contact
v Account code: 98577
v Time and date of delivery
v Accurate destination address with zip code
v Time and date of return pickup
You must return the lift tool at the time that was scheduled with UPS Logistics. If you need to change the
scheduled return time or date, contact UPS Logistics. You are responsible for ensuring that all of the
paperwork and components are packed and restored in the lift tool shipping container. Make sure that
the lift tool is functioning properly before you release the tool to UPS Logistics for return. You are
accountable for the lift tool until UPS Logistics picks up the lift tool for return delivery to their parts
storage facility. Contact your branch office tools coordinator or your region specialist if you have any
questions or concerns.
Installation sequence
The following sequence summarizes the installation steps you will perform in this chapter:
1. Prepare the installation site and the rack cabinet. Unpack the DCS3700 and other hardware from the
shipping box. See “Preparing for installation” on page 26.
56.7 kg (125 lbs)
102 kg (225 lbs)
(12 x 5)
(60X)
24 IBM System Storage DCS3700: Installation, User, and Maintenance Guide
To Next Page
Loading...
Need help?
General