40000021-00000000 Management Controller [arg1] clock has been set from NTP server [arg2].
Explanation: The IMM clock has been set to the date and time that are provided by the Network Time Protocol
server.
May also be shown as 4000002100000000 or 0x4000002100000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0033
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000022-00000000 SSL data in the Management Controller [arg1] configuruation data is invalid. Clearing
configuration data region and disabling SSL.
Explanation: There is a problem with the certificate that has been imported into the IMM. The imported certificate
must contain a public key that corresponds to the key pair that was previously generated through the “Generate a
New Key and Certificate Signing Request ” link.
May also be shown as 4000002200000000 or 0x4000002200000000
Severity: Error
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: IMM and ID: 0034
SNMP Trap ID: 22
Automatically notify Support: No
User response: Complete the following steps until the problem is solved:
1. Make sure that the certificate that you are importing is correct.
2. Try to import the certificate again.
40000023-00000000 Flash of [arg1] from [arg2] succeeded for user [arg3] .
Explanation: The specified firmware update has been completed.
May also be shown as 4000002300000000 or 0x4000002300000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0035
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000021-00000000 • 40000023-00000000
382
IBM System x3850 X5 and x3950 X5 Types 7145, 7146, 7143, and 7191: Problem Determination and Service Guide
To Next Page
Loading...
Need help?
General