To Next Page

To Previous Page

Appendix B. Integrated management module error messages

This topic provides descriptions of integrated management module error messages.

The IMM messages are displayed in the integrated management module (IMM)

event log. You can view the IMM event log through the IMM Web interface and

through IBM Dynamic System Analysis (as the ASM event log). For more

information about IMM, see the Integrated Management Module User's Guide at

http://www.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5079770

IMM Events that automatically notify Support

You can configure the Integrated Management Module II (IMM2) to automatically

notify Support (also known as call home) if certain types of errors are encountered.

If you have configured this function, see the table for a list of events that

automatically notify Support.

Table 25. Events that automatically notify Support

Event ID Message String

Automatically

Notify

Support

80010202-0701ffff Numeric sensor

[NumericSensorElementName] going low

(lower critical) has asserted.

Yes

80010202-2801ffff Numeric sensor

[NumericSensorElementName] going low

(lower critical) has asserted.

Yes

80010902-0701ffff Numeric sensor

[NumericSensorElementName] going high

(upper critical) has asserted.

Yes

80010b03-1500ffff Numeric sensor

[NumericSensorElementName] going high

(upper non-recoverable) has asserted.

Yes

80070608-2201ffff Sensor [SensorElementName] has

transitioned to non-recoverable.

Yes

806f0021-0b04ffff Fault in slot

[PhysicalConnectorSystemElementName] on