Icom IC-450 - HM-212 Description

2
UNIT DESCRIPTION
2
■ HM-212 Description
Speaker
Microphone
o
i
u
y
t
r
e
w
q
q POWER KEY (p. 10)
Hold down for 2 seconds to turn the power ON or OFF.
w CLEAR KEY (pp. 14, 16)
Push to cancel a setting or to return to the previous
menu.
e VOLUME CONTROL KEYS
/
Push to adjust the audio level (from 0 to 32). ➥
  •“ ” appears when the audio level is set to 0 (silent mode).
r D-PAD KEYS []/[]/[]/[]/[]
Push [ ➥ ]/[] to select an operating channel, menu
setting and so on. (pp. 10, 16)
Push [ ➥ ]/[] to select a digit to edit. (pp. 29, 33)
Push [ ➥ ] to select an item or setting in the menu.
(pp. 29, 33)
Push [ ➥ ] to select the Priority CH in the standby mode.
Hold down [ ➥ ] for 2 seconds to set the displayed
channel as a Priority channel. (p. 13)
  •HolddownagaintounsetthePrioritychannel.
t REC DATA/REC PAUSE KEY (p. 15)
Push to display the recorded audio menu. ➥
Hold down for 2 seconds to start and stop recording. ➥
y SCAN/MONI KEY (pp. 14, 23)
Push to start or stop the scan. (pp. 23, 24, 25) ➥
Hold down for 2 seconds to turn the Monitor function ➥
ON or OFF . (p. 14)
u MENU/KEY LOCK KEY
Push to enter the menu mode. (p. 16) ➥
Hold down for 2 seconds to turn the Key Lock function ➥
ON or OFF.
i PTT SWITCH [PTT] (p. 12)
 Hold down to transmit, release to receive.
o TX/RX INDICATOR (p. 12)
 The indicator lights or blinks when you transmit and receive.
7
Information: You can disable the keys, or each key function can be reassigned to the keys using the optional CS-450 c l o n i n g s o f t w a r e . (p. 34)