Icom IC-450 - Specifications and Options - Accessories; Optional Accessories and Software

36
10
SPECIFICATIONS AND OPTIONS
Specifications ■
Receiver (Continued) D
[RX (450.000–520.000 MHz)] (Except CB (476.425–477.4125
MHz))
•Sensitivity(12dBSINAD): 0.25µVtypical
•Humandnoise: 45dBtypical
• Conducted spurious radiation : Less than –57 dBm
(9 kHz–1.0 GHz)
Less than –47 dBm
(1.0 GHz–4.0 GHz)
•Audiofrequencyresponse: +2dBto–8dBof6dB/octavefrom
300 Hz to 2550 Hz
(at the 1 kHz reference)
All stated specifications are subject to change without notice or
obligation.
■ Options
Microphone D
• HM-212 h a n d m i c r o p h o n e
Wired remote control microphone with key backlight. The same
microphone that is supplied with the transceiver.
• OPC-2355 e x t e n s i o n c a b l e
2.5 m microphone extension cable. Same cable as supplied with
the transceiver.
Speaker D
• SP-22/SP-35 e x t e r n a l s p e a k e r
Compact and easy to install.
Cloning software D
• CS-450 c l o n i n g s o f t w a r e + OPC-1122U u s b c l o n i n g c a b l e
Provides quick and easy entry for items, such as set mode
contents, zone type, and so on using the PC’s USB terminal.