24
6
SCAN
■ Group scan and priority scan
Group and priority scans repeatedly look for a signal on the
priority channel while scanning the specified channels. This
is useful when waiting for a call on the priority channel or
several specified channels.
The Group and Priority scans are performed differently
when transmitting. The Group scan can transmit on a priority
channel or on a busy channel, and the Priority scan can
transmit only on a priority channel.
Select“GroupScan”or“PriorityScan”inthe“ScanMode” q
menu. (p. 22)
•“ ”appearswhenaGroupscanisselected,and“ ”
appears when a Priority scan is selected.
Group scan is selected.
Priority scan is selected.
Appears
Appears
When the priority scan type is selected in step w q, set the
Priority channel, if desired. (p. 13)
•Iftheprioritychannelisnotset,thescanstartchannelis
monitored during a Priority scan.
Push e to start the scan.
Scan start channel
Blinks
Scan start channel
Blinks
Group scan Priority scan
r When receiving a signal, the scan pauses and resume,
according to the selected scan resume mode.
(pp. 17, 23)
t Push
to cancel the scan.
To Next Page
Loading...
