Icom IC-450 - Selcall Code Editing; TX Code Editing

29
8
SELCALL (Selective Calling)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D TX code edit
You can change the TX code contents within the allowed
digits. The Group call function enables you to edit a special
‘Group code’ of the Selcall ID code.
Select the desired CB channel except for channels 5 and q
35.
Push w
to enter the menu mode.
Push [ e ] or []toselect“EditCode”toenterthecode
edit mode.
 (“Selcall”>“EditCode”)
Select a code to start the TX code edit. r
Push [ t ] or [] to select the digit to edit.
The editable digit
is selected
y Push [] or [] to select the desired number.
u Repeat steps t and y to edit other digits.
Push [ i ] to set the edited code.
 •TheeditedcodeisdisplayedontheTXcodechannelselection
mode.
NOTE: The TX code’s editable digits can only be set, or
changed using the CS-450
c l o n i n g s o f t w a r e .
✓ CONVENIENT!
You can also transmit on the selected channel’s TX code by
selecting“Transmit”inthe“Selcall”menuitem.
Select to transmit