Icom IC-718 - Memory List Screen; D Selecting a Memory Channel Using the Memory List Screen

N Memory list screen
The memory list screen simultaneously shows 7
memory channels and their programmed contents. 13
memory channels can be displayed in the wide mem-
ory list screen.
You can select a desired memory channel from the
memory list screen.
D Selecting a memory channel using the memory list screen
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [MEMORY] (F-4) to select memory list
screen.
• Pushing [WIDE] (F-6) switches the standard and wide
screens.
e While pushing and holding [SET] (F-2), rotate the
main dial to select the desired memory channel.
• [∫] and [√] can also be used.
r Push [EXIT/SET] to exit memory list screen.
MEMORY
WIDE
SET
EXIT/SET
Main dial
F-2 F-4
F-6
• Memory list screen
D Confirming programmed memory channels
q Select memory list screen as described above.
w While pushing [ROLL] (F-1), rotate the main dial to
scroll the screen.
e Push [SET] (F-2) to select the highlighted memory
channel, if desired.
• “≈” appears beside the selected memory channel num-
ber in the memory list screen and the selected memory
channel contents are displayed below the frequency
readout.
r Push [EXIT/SET] to exit memory list screen.
SET
EXIT/SET
Main dial
F-2
ROLL
F-1
100
6
MEMORY OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21