Icom IC-718 - Receiver Adjustments

N Memory names
All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 10 charac-
ters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ’ ` ^ + – 1 / . , : ; = < > ( ) [ ] { } | _ ~
@) and space can be used.
D Editing (programming) memory names
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w
Push [MEMORY] (F-4) to select memory list screen.
e Select the desired memory channel.
r Push [NAME] (F-4) to edit memory channel name.
• A cursor appears and blinks.
• Memory channel names of blank channels cannot be
edited.
t Input the desired character by rotating the main
dial or by pushing the keypad for number input.
• Push [ABC] or [abc] to toggle capital and small letters.
• Push
[123] or [Symbol] to toggle numerals and sym-
bols.
• Push
[Ω] (F-1) or [≈] (F-2) for cursor movement.
• Push
[DEL] (F-3) to delete the selected character.
• Push
[SPACE] (F-4) to input a space.
• Pushing the transceiver’s keypad,
[0]–[9], can also en-
ter numerals.
y Push [EXIT/SET] to input and set the name.
• The cursor disappears.
u Repeat steps e to y to program another memory
channel’s name, if desired.
i Push [EXIT/SET] to exit memory list screen.
 For your convenience
When a PC keyboard is connected to [USB] (A) con-
nector on the front panel, the memory name can also
be edited from the keyboard.
N Memory clearing
Any unused memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
q Select memory mode with [VFO/MEMO].
w Push [MEMORY] (F-4) to select memory list
screen.
e Select the desired memory channel with [∫]/[√].
r Push and hold [CLR] (F-5) for 1 sec. to clear the
contents.
• The programmed frequency, operating mode and filter
disappear.
t To clear other memory channels, repeat steps e
and r.
F-1 F-2 F-4
F-3
EXIT/SET
Main dial
Symbol ABC
123 abc
DEL
SPACE
Keypad
F-5
CLR
Push for 1 sec.
Beep
Beep
Beep
(CLR)
F-5
103
6
MEMORY OPERATION