Icom IC-718 - Clock and Timers; Time Set Mode

N Time set mode
F-1 F-2 F-4
F-6
EXIT/SET
Main dial
SET
CLOCK
TIME
The IC-7600 has a built-in calendar and 24-hour
clock (accuracy ±75 sec. per month) with daily power
ON/OFF timer functions. Before operating these timer
functions, set the current date and time.
q Push [EXIT/SET] several times to close multi-func-
tion screen, if necessary.
w Push [SET] (F-6) to select set mode menu screen.
e Push [TIME] (F-4) to select time set mode.
r Push [CLOCK] (F-1) to select clock set mode.
t Push [Y] (F-1) or [Z] (F-2) to select the desired item.
y Rotate the main dial to set or select the desired
value or condition.
u Push [EXIT/SET] to exit time set mode.
Date 2000 – 1 – 1 ( Sat )
Sets the date.
z Push [Ω ≈] (F-3) to select between the year and the
month/day, then rotate the main dial to select them.
• The date setting and “DATE-set Push [SET]” indica-
tion blink.
x Push [SET] (F-5) to set the date.
Time (Now) 1:23
Sets the local time.
z Rotate the main dial to set the local time.
• The time setting and “TIME-set Push [SET]” indication
blink.
x Push [SET] (F-5) to set the time.
CLOCK2 Function ON
Turns the CLOCK2 indicator ON and OFF.
CLOCK2 is convenient to indicate UTC or other
country’s local time, etc.
• ON : The CLOCK2 indicator is displayed below
the local time indication.
• OFF : The CLOCK2 indicator does not display.
CLOCK2 Offset ± 0:00
Sets the desired off-set time period for CLOCK2 dis-
play within –24:00 to +24:00 in 5 min. steps.
• Push and hold [DEF] (F-4) for 1 sec. to select the default
value.
CLOCK2 Name UTC
Sets the desired 3-character name for CLOCK2.
Capital letters, small letters, numerals, some sym-
bols (! # $ % & ¥ ? " ’ ` ^ + – 1 ⁄ . , : ; = < > ( ) [ ] { } |
_ ~ @) and spaces can be used.
z Push [EDIT] (F-5) to select the name edit condition.
• The cursor under the 1st character blinks.
x Push [ABC] (MF6), [abc] (MF6), [123] (MF7) or
[Symbol] (MF7) to select the character group,
then rotate the main dial to select the character.
• Push [ABC] or [abc] to toggle capital and small letters.
•
Push [123] or [Symbol] to toggle numerals and symbols.
• Push [Ω] (F-1) or [≈] (F-2) for cursor movement.
• Push [DEL] (F-3) to delete the selected character.
• Push [SPACE] (F-4) to input a space.
• Pushing the transceiver’s keypad, [0]–[9], can also
enter numerals.
c Push [EXIT/SET] to set the name.
9
115
CLOCK AND TIMERS