N Preparation
D Firmware and firm utility
The latest firmware and the firm utility can be down-
loaded from the Icom home page via the Internet.
Access the following URL to download the firm utility
and the latest firmware.
http://www.icom.co.jp/world/support/index.html
For updating from the USB-Memory
When updating the firmware from the USB-Memory,
copy the downloaded firmware data
(e.g. 7600_110.
dat)
to the USB-Memory (in “IC-7600” folder) using
an available USB port
(USB hub may be required; pur-
chased separately from your PC dealer)
.
D File downloading
q Access the following URL directly.
http://www.icom.co.jp/world/support/index.html
w Click “Firmware Updates/Software Downloads” link
then click the firmware file link.
e Read “Regarding this Download Service” carefully,
then click [AGREE].
r Click [Save] in the displayed File Download dialog.
t Select the desired location in which you want to
save the firmware, then click [Save] in the dis-
played File Download dialog.
• File download starts.
y After download is completed, extract the file.
• The firmware and the firm utility are compressed in
“zip” format, respectively.
• When updating the transceiver using with the USB-
Memory, copy the extracted firmware (e.g. 7600_110.
dat) to the USB-Memory IC-7600 folder.
• The USB-Memory must have been formatted by the IC-
7600. (p. ??)
Click
Read carefully
http://www.icom.co.jp/world/support/download/firm/IC-7600/1_10/index.html
Clic
Select the saving
location
Click
7600_110.dat
162
14
UPDATING THE FIRMWARE
To Next Page
Loading...
