Icom IC-7400 - Page 43

30
4
RECEIVE AND TRANSMIT
2001 NEW
F 1
F 2F 3 F 4 F 5
F 2
F 1
F 4 F 3
Repeat indicators Count up trigger
indicator
Counter
M1 M2 M3 M4 -1
M1
M2 M3 M4 -1
M2 send indication
M1 M2 M3 M4 -1
CQ
TEST CQ 001
CQ
TEST CQ 001
QRZ?
M1
M2 M3 M4 -1
UR
5NN001 B 001
001
M1
M2 M3 M4 -1
UR
5NN001 B 001
CFM
TU 001
M1 send indication
M2 send indicationRepeat send indication
M1 M2 M3 M4 -1
M4 send indication
M1 M2 M3 M4 -1
M3 send indication
DD
Memory keyer send menu
Pre-set characters can be sent using the keyer send
menu. Contents of the memory keyer are set using the
edit menu.
• Transmitting
q While M1 is selected in CW mode, push [F4 KEY]
to select the memory keyer menu.
w Push [F2 SND] to select the keyer send menu.
e Push [TRANSMIT] to set the transceiver to trans-
mit, or set the break-in function ON (p. 55).
r Push one of the function keys ([F1] to [F4]) to send
the contents of the memory keyer.
•Pushing a function key for 1 sec. repeatedly sends the
contents; push any function key to cancel the transmis-
sion.
•The contest number counter, above [F5], is incremented
each time the contents are sent.
•Push [F5] to reduce the contact number count by 1 when
resending contents to unanswered calls.
For your information
When an external keypad is connected to the
pin 3 and pin 7 of the [MIC] connector, the pro-
grammed contents, M1—M4, can be transmitted
without selecting the keyer send menu.
See p. 86 for details.
t Push [MENU] 2 times to return to M1.
IC-7400.qxd 02.4.2 11:35 Page 30