22
6
DSC OPERATION
New2001
r Push [Y] or [Z] to select the desired intership channel,
push [ENT].
• Intership channels are already preset into the transceiver in
preferred order.
• After pushing [ENT], Channel 70 is automatically selected and
“READY” appears at the channel comment indicator.
t Push [ENT] to transmit the Individual call.
• If Channel 70 is busy, the transceiver stands by until the chan-
nel becomes clear.
• Routine category only is available.
y Stands by on the intership channel, specified in step r,
until an acknowledgement is received.
• “WAIT ACK” scrolls at the channel comment indicator.
u When the acknowledgement is received, “DSC” appears
and “RCV ABLE ACK” or “RCV UNABLE ACK” scrolls at
the channel comment indicator with beeps.
• Push [CLR] to stop the beep.
‘Able to comply’ is received.
‘Unable to comply’ is received.
Scrolls
Scrolls
i Push and hold [PTT] to communicate your message to
the responding ship when ‘Able to comply.’
• Push [CLR] to return to the operated channel (before entering
the DSC menu) when ‘Unable to comply’ is received.
To Next Page
Loading...
