Icom IC-M411 - Transmitting an Individual Acknowledgement

23
6
DSC OPERATION
New2001
6
D Transmitting an Individual acknowledgement
When receiving an Individual call, you can transmit an ac-
knowledgement (‘Able to comply’ or ‘Unable to comply’) by
using the on screen prompts (Quick ACK.) Also, you can send
an acknowledgement through the menu system (Manual ACK.)
Quick ACK:
➥ After an Individual call is received, push [CLR] to stop
beep, then push [ENT]. (Go to step r as below.)
Manual ACK:
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select “INDV ACK,” push [ENT].
• “INDV ACK” item appears after receiving an Individual call.
Scrolls
e Push [Y] or [Z] to select the desired individual address,
push [ENT].
Scrolls
r Push [Y] or [Z] to select the acknowledgement “ABLE”
or “UNABLE,” push [ENT].
• “UNABLE” selection will transmit the reason “No Reason Given”.
• After pushing [ENT], Channel 70 is automatically selected and
“READY” appears at the channel comment indicator.
‘ABLE’ is
selected.
Push
t Push [ENT] to transmit the acknowledgement call to the
selected station.
Transmitting
y After the Individual acknowledgement call has been trans-
mitted, the specified channel (specified by the calling sta
-
tion) is selected automatically when “ABLE” is selected,
or returns to the previous condition (before entering the
DSC menu) when “UNABLE” is selected in step
e.
Scrolls
After transmitting ‘ABLE’ ACK