1. Set up
q Set the frequency you want to program in VFO mode.
w While pushing [FUNC], push [
(V/M)MW] to enter mem-
ory write mode.
2. BANK and memory channel setting
q While pushing [FUNC], rotate [DIAL] to select the BANK
you want to program (p. 24).
w Rotate [DIAL] or push 2 digit keys to select the memory
channel you want to program (p. 24).
4
MEMORY MODE
27
■ Programming a memory channel — 3
This is the easiest way to memorize the received frequency,
mode and other information along with memory, BANK
names, scanning condition, etc. in one operation.
3. Programming details
q Push [EDIT] to enter memory programming mode.
w Rotate [DIAL] or enter the alphanumeric characters via
the keypad to program a memory name.
•When you enter channel names with [DIAL] or a character as-
signed to the same key, push [ENT] before you enter the next
character to change the digit (see page 72 for alphanumeric
key assignments).
To Next Page
Loading...
