10
OTHER FUNCTIONS
65
Set ATT
While pushing [FUNC], push [(0)ATT] to toggle the ATT
function ON and OFF.
■ ATT function
The ATT (attenuator) function protects desired signals from
distorting when excessively strong signals, such as broad-
cast, pager signals, etc. are nearby. This setting can be mem-
orized into memory channels.
Set NB/ANL
While pushing [FUNC], push [(ENT)NB/ANL] to toggle the
NB or ANL function ON and OFF.
■ NB/ANL function
The NB (noise blanker) function removes pulse-type noise
when USB, LSB or CW is selected. The ANL (automatic
noise limiter) function reduces noise components when AM
is selected.
To Next Page
Loading...
