Icom IC-R10 - 8 Edit Function; I General; I Memory Channel Edit

EDIT FUNCTION
8
51
■ Memory channel edit
You can store the following items into a memory channel:
1. Frequency settings: (SET FREQ)
Memorized frequencies can be edited or erased.
2. Channel names: (SET CH NAME)
Alphanumeric names can be input or edited. (Up to 8
characters per name.)
3. Receive mode: (SET MODE)
Receive mode can be specified.
4. SKIP setting: (SET SKIP)
SKIP settings can be toggled ON or OFF for memory
skip scan (pgs. 39, 43, 44).
5. Attenuator setting: (SET ATT)
Attenuator settings can be toggled ON or OFF.
6. BANK names: (SET B-NAME)
Alphanumeric names can be input or edited. (Up to 10
characters per name.)
■ General
The edit function is used for arranging memorized contents
into the following channels:
Memory channels
Program/auto-memory write scan channels
EASY mode channels